Product Description
Lift Acess Control
The lift linkage board is mainly used for the joint work between "building intercom system" and "FCARD series elevator access control system". It is mainly responsible for collecting door opening and floor signals sent by the building intercom system, and translating the data to FCARD series elevators Access control board to meet the needs of shuttle visitors to designated floors.
Supports two linkage working modes
1. Communication protocol linkage mode, this mode is that the "linkage board" connects and communicates with the building intercom system host through RS232 or RS485, and obtains floor instructions to complete the transfer of visitors to the designated floor.
2. The floor signal collection mode refers to the direct collection of the door opening signal given by the rooms on each floor through the linkage board to complete the transfer of visitors to the designated floor. If the building intercom system supports protocol linkage, please select the protocol linkage method. If not, you can choose to directly collect floor signals to achieve this.
Support Communication
1 set of USB communication,
1 set of RS232 communication port with building intercom system,
1 set of RS485 communication port with building intercom system,
1 set of RS485 communication port with elevator access control board,
1 set of RS485 communication with upper level linkage board 6 groups of elevators to the 1st floor and open the door signal input port,
8 groups of floor door open signal collection ports,
1 group of elevator call output ports.
Delay setting:
1. Call delay: After allowing visitors to enter, delay according to the distance from the door to the elevator, so as to prevent the elevator from leaving before the visitor reaches the elevator, resulting in empty pick-up and drop-off. (Range: 0.5 seconds to 255 seconds can be set, the default is 3 seconds)
2. Call button: 0.5 seconds (range: 0.5 seconds to 255 seconds can be set, the default is 0.5 seconds)
3. Re-send the elevator call: If the elevator does not arrive at the first floor to pick up the visitor within 120 seconds after the elevator is called, the FC-ED86 linkage board will automatically resend the elevator call. Repeated 4 times, the elevator still does not pick up visitors on the first floor, and the linkage board will automatically cancel the pick-up.
4. The time of the elevator door is stuck: In order to prevent the elevator from closing the door too quickly, when the elevator runs to the 1st floor to pick up the visitor, the linkage board informs the elevator to delay the door closing, so that the visitor can enter the elevator smoothly. (Range: 0.5 seconds to 255 seconds can be set, the default is 1 second)
Product Parameters
| Working voltage |
DC12V/3A |
| Working current |
500mA(Excluding card reader) |
| Working temp |
-25`+75 |
| Working hunidity |
10`90%RH |
| User limit |
26000 |
| Data capacity |
100,00 |
| Networking |
RS485 and TCP/IP(TCP/IP is optional) |
| Communication distance |
1200m(RS-485 networking) |
| Data storage |
10years (Power off state can be saved for 10 years) |
| Motherboard size |
230mm*145mm*22mm |
Function And Advantage
1.JUTAl intelligent elevator management system is used for elevator hierarchical control and personnel access control, to meet the management needs of building property management companies or managers for access to elevators.
2. lt can authorize the floors that people enter and exit through authority management.only authorized floors can enter or exit by pressing the indicator light and the indicator light will act.for unauthorized floors, press the floor indicator light, and the indicator light has not act, can not entry or exit the floor.
3.It can setting manage time zone,within this time zone can entry or exit this floor, if exit this time zone, can not entry or exit this floor, in order to
achieve more secure access control.
4.It can independently store 26,000groups of personnel and 100,000records, and at the same time, all access records can be viewed on the software side.
5.The elevator control board has 16independent relays, which can manage16 floors,and can be expanded through expansion boards.one expansion
board can expand 16 floors and manage32 floors at most.
6.Support RS485 and TCP/IP, with 2Wiegand interfaces, can be connected to the reader, fingerprint machine or face machine, input and output with voltage dynamic protection, all relays with dynamic over voltage protection,support fire alarm input linkage.
____________________________________________________________________________________________
Company profile
SHENZHEN JUTAI COMM Co., Ltd., founded in 2012, with a registered capital of 2 million, is a high-tech enterprise integrating production, research and development, manufacturing and sales. The founders of the company have more than 10 years of work experience in the research and development as well as sales of RF products. At the beginning, JUTAI mainly focus on the development of a series of card reader from low frequency to microwave, including 125KMHZ, 13.56KMHZ, 868915KMHZ, microwave 2.45 KMHZ and semiactive 125K&2.45G. As the development of the market, we expand a series of wireless infrared security detection equipment for access control, based on our self-developed hardware RF product technology. Photocell Family Group includes wired photocell with 20 meters sensing distance, wireless photocell sensor, wireless rotatable infrared sensor and reflective photoelectric beam sensor. In addition, to promote the in-depth application of the project, we have also expand a series of software and hardware solutions around industry applications. The project solutions we have developed mainly include parking management system, card reader access control system, visitor management system (Love Home Solution), automatic door access remote control system (GateLink Solution), and the development of the large-scale cloud software management platform (JUTAI Clouds Solution).
){kind=link}