| Customization: | Available |
|---|---|
| Type: | Sensor |
| Usage: | Anti-theft, Safety |
|
Still deciding? Get samples of US$ 13/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Automatic Door Safety Counter Beam: Used to prevent the door from trapping people or objects when closed.Consistsof a pair of infrared emitters and receivers that areare mounted on either side of the door and create an infrared beam.When a person or object passes through the door, this beam is interrupted, triggering the door to stopclosing or openingaction to prevent pinching or crushing events.
Note: 1.Power Input AC/DC12-30v
2.lf used 1 group beam, need to connect to single beam
3.DIP1 setting singlel double beam
4.DIP2 setting range
5.NO/NC Output can selected
1)Using wiring method , wiring is simple,convenient and accurate.
2)Using microcomputer control technology, the system has high integration and strong stability.
3)The international general optical lens design has good focusing, reasonable control angle, and is easy toinstall.
4)Using special microcomputer coding transceiver technology, the transmitter and receiver have a longdistance and strong anti-interference ability.
5)Adopting german receiving filtering, decoding, and amplification systems to effectively solve the problemof resisting natural sunlight interference.
6)lt has a single or double group of transceiver lenses and separate connection outputs. The connection hasgood shielding properties and can control one beam of light or two beams of light.
7)After light occlusion triggers, the output can flexibly select normally open or normally closed signals.
8)Wide voltage input design, valid for both 12-30V AC and DC powerinput.
9)The unique high-precision calculation mode and sunlight filter factor greatly improve the anti-interferenceability of the system.
1)The single beam must be connected to group A, and the double beam must be connected to group AB.
2)When installing the electric eye , the diameter of the drilled hole is 13mm.
3) When using a single beam of light, the recommended installation height is 60cm from the ground.
4)When using double beams, one set is installed at a height of 30cm from the ground, and the other set isinstalled at a height of 90cm from the ground.
5)The transmitter and receiver has a certain automatic capture range, but please be sure to align it wheninstalling to ensure consistency in the horizontal and vertical directions.
6)Normally, you should be careful not to place piles of objects between the transmitter and receiver to avoidblocking and malfunctioning.
7)This system has excellent resistance to natural light interference, but when installing, try to avoid directfrontal exposure to strong sunlight to the electric eye .
8)Make sure that the height of the safety light from the ground is not less than 20cm.
| Working voltage | AC/DC10-30vDc |
| Quiescent Current | 18mA(12V Electricity) |
| Operating Current | 58mA(12V Electricity) |
| Maximum Transceiver Distance | 10m |
| Output Contact Normally Open And Closed | Jumper cap selection setting (Default is normally open) |
| RX Cable Length | 5.5m |
| Tx Cable Length | 5.5m |
| Number of Beams | Single- or dual-beam option |
| Operating Temperature | -42~45ºC |
| Operating Humidity | 10~90%RH |
| Material | ABS |
| Controller Dimension | 109.5(L)*41.1(W)*25.6(H)mm |
| Beam Dimension |
19(L)*13(D)mm |
){kind=link}