Product Description
Product Name: CE Sliding Door Opener 1000~2000kgs Sliding Gate Motor
Category: Automatic Door
Keywords: Sliding Gate Curtain Sensor, Infrared Photo Beam Sensor, Infrared Sensor, Garage Door, Sliding Gate Motor, RF Remote Control, Automatic Sliding Gate Motor, Garage Door Opener, Sliding Gate Opener, Swing Gate Operator, Sliding Gate Operator, Loop Detector, Safety Curtain Light, Door Opener, Automatic door opener, CE certified motor, Heavy-duty sliding motor, 1000-2000kgs capacity, Electric gate operator, Sliding door mechanism
Description: The CE Sliding Door Opener 1000~2000kgs Sliding Gate Motor is a robust and reliable solution for automatic sliding gates. This CE-certified motor is meticulously designed to handle gates with a substantial weight capacity ranging from 1000 to 2000kgs. It incorporates a multitude of safety sensors, including the Sliding Gate Curtain Sensor and Infrared Photo Beam Sensor, ensuring optimal safety during operation. With the convenience of an RF Remote Control, accessing your gate has never been easier or more efficient. Ideal for garage doors, commercial properties, and industrial facilities, this automatic sliding gate motor promises a seamless, secure, and automated entrance solution. Upgrade to the CE Sliding Door Opener and experience unparalleled safety and convenience.
SDM-10G32/SDM-20G32 Encryption Sliding Gate Motor General Introduction:
To simplify installation and configuration, we have engineered an intelligent one-button learning sliding door control board. Utilizing advanced microcomputer chip technology and digital control, this board offers practical functions, enhanced safety performance, and effortless installation and configuration. It is fully compatible with smartphone app networks (WiFi/3G/4G/5G) and supports Bluetooth control along with several other innovative features.
Features:
1. Anti-rush Design: Upon initial operation after each power-on, the motor runs in slow motion to the limit point, preventing it from rushing out. When the door reaches the limit, the motor can only be operated in the opposite direction, ensuring the limit isn't broken. Note: When in place, it has a power-off protection feature, and the motor only moves in the opposite direction when repowered.
2. Master-slave Mode Available: Two motors with the same control board can operate synchronously. In this mode, functions like infrared sensing, ground sense, and automatic door closing are synchronized. Note: Infrared and ground sensing must be connected to the master motor.
3. Motor Runtime Protection: To prevent the motor from running during travel failure, the control board automatically learns the motor's running time without manual setting, adding an extra 10 seconds as a time margin.
4. Auto-close Function: The door can be set to close automatically within a timeframe of 1 to 250 seconds, with a default setting of 3 seconds.
5. Soft Start and Slow Stop: Features include soft start and slow stop options. The distance and speed of the slow stop can be adjusted for smooth operation.
6. Stop & Rebound Against Resistance: Options include stopping or rebounding against resistance during closing travel, and stopping against resistance during opening travel.
7. Onboard Socket for Bluetooth Module: Integrated onboard socket for the standalone Bluetooth module (module not included by default).
8. One-button Configuration for Internet Control: Easily pairs with internet controllers by pressing a single button onboard, eliminating the need for a copy procedure.
Product Parameters:
| Working voltage |
DC24V output |
| Max output current |
10A |
| Fuse |
AC220 20A |
| Remote Distance |
30m |
| Remote control |
2pcs anti-copy rolling code remotes |
| Working temp |
-25ºC to +75ºC |
| Max gate weight |
1000kg |
| Output Torque |
21N.m |
| Rotation Speed |
12m/min |
| Limit Switch |
Magnetic(NC/NO) Spring |
| Noise |
less than 50dB |
| Mobile APP |
with WIFI or Bluetooth |
| Charger power battery |
24V3A charger power battery(not include) |
| Encryption Remote Frequency |
433MHZ |
Diagram:
Configuration Introduction:
Dip Switch: Remote Control One-key and Four-key Modes Switch
OFF position: Remote control with four independent keys functioning as Open, Close, Stop, and Lock.
In non-passageway mode, press the Lock key, then press the Stop key before any operation can be performed.
ON Position:
(1) A single key on the remote serves as the one-key control key (the specific key paired during setup).
(2) Each key on the remote can act as a one-key control key.
Function Setting: Turn to ON and press SET once (single beep) for single key one-key mode, press again (four beeps) for 4-key one-key mode. Turn to OFF to finalize the setting.
Dip Switch: Passageway Mode
OFF Position: Activates the Lock button on the remote control (Refer to Remote Control Pairing on Page 4).
ON Position: Enables passageway mode (toggle to OFF, then ON).
When the gate is closed at the limit position, pressing the Lock key initiates opening motion for 6 seconds.
Dip Switch: Auto-close
OFF Position: Disables the auto-close function.
ON Position: Activates auto-close function. When the gate opens to the limit position, the countdown begins, and the gate automatically closes to the limit position.
Auto-close Timer Setting: Turn to ON, each press on the SET key adds 1 second, up to 250 seconds. Turn to OFF after setting.
Dip Switch: Slow Stop
OFF Position: Disables the slow stop function.
ON Position: Enables the slow stop function (effective only after travel distance learning).
Adjust the Slow Stop speed using the MT adjustor: turn clockwise to increase speed, anticlockwise to decrease speed.
Travel Distance Learning: Turn to ON, hold down ONE key until the gate starts moving automatically. It will close, open, and re-close to the limit with a slow stop. After 2 beeps, the procedure is complete.
Dip Switch: Startup Strength
OFF Position: Enables slow start. The gate runs at a slower speed for the first 2 seconds to reduce tremble.
ON Position: Runs the gate at maximum speed from the start.
Dip Switch: Setting Key
OFF Position: Activates the settings.
ON Position: Enables setting mode for One-key, Auto-close, and Slow Stop functions. Turn to OFF after setting to activate changes.
Dip Switch: Resistance Stop & Rebound
OFF Position: The gate stops at either the open or close end.
ON Position: The gate stops against resistance when opening. When closing, it stops against resistance for 1 second, then rebounds.
Optimized Resistance Rebound Adjustment: Ensure the motor functions properly. Turn on the dip switch, then while closing, rotate the FORCE adjustor anticlockwise to set the threshold. Suggested setting is to slightly rotate clockwise for final resistance force.
Dip Switch: Motor Rotation Direction Swap
Switch to reverse the rotation direction of the gear.
Blue Dip Switch: Normally Closed/Open
OFF Position: Set the motor status to normally open.
ON Position: Set the motor status to normally closed.
Blue Dip Switch : Master-slave Mode
OFF Postion: Set the current motor as the master motor.
ON Position: Set the current motor as the slave motor.
Master-slave mode means 2 motors with the same control board installed on each work synchronously when the master motor is being operated. Connect 2 motors through the 485A+B- interfaces on both motors in parallel to realize the master-slave mode.
Remote Control Paring and Deletion
Pairing
Hold down the STUDY button on the control board for about 1s until a buzz, then hold down any key of the remote
control, release it against a buzz, and the pairing procedure is complete. Repeat this step to pair more remotes.
Up to 120 remotes can be paired with a single board.
Deletion
Hold down the STUDY button on the control board for about 7s, release it against 3 continuous buzzesto delete all
paired remotes.
P.S.: After entering the pairing state, if no effective RF signal is sensed, the board will exit the pairing state
automatically with a buzz and the LED returning to always on
B.Gatelink Roling Code Learning Method
Remote Without Locked Type (Button No Function)
Press and hold the "Learn/Delete" button on the GateLink receiving board for about 1 second,the indicator
will turn off,can hear the buzzer give a "didi"sound,to remind the user release the button,and then enter into
remote learning type, press and hold the remote transponder any button(open/close/stop),release it after
heard the buzzer give"didi"sound again,learning finished;
Remote With Locked Type(Button With Function )
Press and hold the "Learn/Delete" button on the GateLink receiving board for about 1 second,the indicator
will turn off,can hear the buzzer give a "didi"sound,to remind the user release the button,and then enter into
remote learning type,press and hold the "Lock" button ,release it after heard the buzzer give"didi"sound
again,learning finished;
If choosed the wrong mode, you can re-learn again. Repeat this step to learn multiple remote transponder,
and the regular version can store up to 64 GateLink ID; (256 Gatelink ID can be optional also)
LED indicators introduction:
RUN indicator
1. The RUN indicator is always on when powered
2, The RUN indicator flashes once everytime an effective RF signal is sensed
3, When setting the timer for auto-close, the RUN indicator flashes once along with a beep against each press on ONE
4, When in the Master-slave mode, the RUN indicator flashes constantly with an interval of 1s
5, When in the auto-close countdown state, the RUN indicator flashes constantly with an interval of 1s
6, When in the motion of opening, the RUN indicator flashes once per second
7, When in the motion of closing, the RUN indicator flashes 5 times per second
UNDER-V indicator
1, When the voltage of the battery ranges between 19 ~ 20V, the UNDER-V indicator remains constantly illuminated, signaling an optimum operational state.
2, When the battery voltage drops below 19V, the UNDER-V indicator starts flashing continuously. This signifies that the board has entered an under-voltage state, and it will cease all opening and closing functions until the voltage is restored.
BLE indicator
1, If the Bluetooth module is not bound, the BLE indicator will continuously flash once per second, indicating a non-paired status.
2, Upon successful binding, the BLE indicator flashes once per second when connected to the mobile app, and turns off when the app is exited, ensuring you always know the connection status.
3, Press and hold the BLE key for 5 seconds to reset the Bluetooth feature, during which the BLE indicator will stay illuminated, signaling that the reset is in progress.
Charge indicator
1, During charging, the red LED remains continuously on, signaling active charging.
2, Once fully charged, the red LED will turn off, indicating that the charging process is complete.
Photocell indicator
When triggered, the corresponding red LED will illuminate, otherwise it stays off. This helps in promptly identifying an active photocell.
Stop indicator
When triggered, the corresponding red LED lights up, otherwise it remains off, providing a clear visual indication of the stop function.
Manual button indicator
When triggered, the corresponding red LED illuminates, otherwise it stays off, signaling manual button activation.
Closing indicator
When triggered, the corresponding yellow LED lights up, otherwise it remains off, indicating the closing process.
Opening indicator
When triggered, the corresponding green LED lights up, otherwise it remains off, assisting in identifying the opening process.
Loop indicator
When triggered, the corresponding red LED illuminates, otherwise it stays off, making it easy to monitor loop activity.
Closed limiter indicator
When the gate reaches its closed limit position, the corresponding LED stays on; otherwise, it turns off, ensuring precise monitoring of gate position.
Open limiter indicator
When the gate is open at the limit position, the corresponding LED remains illuminated; otherwise, it turns off, providing clear positional feedback.
Buzzer introduction:
1, A buzz sounds each time a dip switch is toggled, offering an audible confirmation of the switch action.
2, When in the unlocked status under Lock mode, pressing the LOCK button on the remote triggers a buzz, indicating the remote is now locked. In the locked status, pressing the STOP button causes two buzzes, signaling that the remote is now unlocked.
3, If both limit switches are triggered simultaneously, the buzzer will continuously sound, and the motor will be inoperable. This indicates a need to adjust the magnet height to resolve the issue.
4, When the gate reaches the open or closed limit position and the corresponding button on the remote is pressed, three continuous buzzes occur, and no action is taken.
5, Stopping due to resistance while opening will result in three continuous buzzes. Stopping or rebounding due to resistance while closing will cause five continuous buzzes, providing immediate feedback on obstacles.
Magnetic limit switch installation guide:
Move the gate to the desired closed position and secure the magnet on the gear rack where the limit switch box is located, ensuring the magnet faces the box. Repeat this for the open position at the other end of the racks. Ensure the left magnet is higher and the right one lower. When at a limit position, the corresponding LED indicator on the board will stay on. If both indicators are on simultaneously along with a constant buzz, adjust the magnet height accordingly.
M-S mode (double machines synchronized) setup guide:
Connection:
1. Set up the Master/Slave configuration by turning the Master/Slave dip switch to ON on the master motor while keeping it in the OFF position on the slave motor.
2. Securely connect the A+ B- interfaces on the master motor to their corresponding interfaces on the slave motor to ensure seamless communication.
After establishing connections, observe the RUN indicators on both the master and slave motors. If they flash synchronously once per second, the setup is correct. If not, verify the wiring connections or check the dip switch statuses.
Exciting Features and Functions:
1. Upon successful M-S mode configuration, remotes paired with the slave motor, as well as the Manual and Study/Delete buttons on the slave motor, will be disabled. Also, external control devices connected to the slave motor will lose Open, Stop, and Close functionalities.
2. During operation, any command given via remotes paired with the master motor, and the Manual or Study/Delete buttons on the master motor, including Open, Stop, and Close commands from external control devices, will be mirrored by the slave motor.
3. Key safety features, such as the resistance stop/rebound function, photocell function, and loop function, can be activated from either motor and will simultaneously execute on the other motor, ensuring comprehensive safety.
4. The automatic close feature of the slave motor is governed by the master motor. To activate this feature, switch the AUTO CLOSE dip switch on the master motor to ON.
5. Customize the low speed rate and resistance force settings individually on each motor to match specific requirements.
6. The limit function for each motor should be configured separately before linking the motors; this ensures accurate and reliable operation.
Discover More Outstanding Products from JUTAI:
Shenzhen Jutai Comm Co., Ltd. is an integrated manufacturer specializing in R&D, production, and sales. Our diverse product range includes loop detectors, photocell beams, safety light curtains, card readers, access control systems, remote controls, traffic lights, barrier gates, gate openers, gate automation systems, and parking management systems, delivering innovative solutions for all your needs.
){kind=link}