Customization: | Available |
---|---|
After-sales Service: | Online Technical Support |
Warranty: | 3 Years |
Still deciding? Get samples of US$ 15/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Features
Introducing our sophisticated direction-detecting microwave sensor, crafted with the pioneering 24G integrated chips. Effortlessly discern approaching signals while skillfully disregarding outgoing ones, minimizing unnecessary door operations. Seamlessly switch to bi-directional detection for added versatility. This sensor boasts clear superiority over conventional module antenna microwave sensors, with benefits such as:
Object Moving Direction Recognition: Possesses an impeccable ability to accurately identify the approach or retreat of individuals or objects.
Superior Shock Resistance: Our sophisticated algorithm effectively mitigates reciprocating vibrations within a specified range.
Ultra-Long Detection Distance: Remarkably, it detects vehicles at distances exceeding 8 meters, while adults are detected at no less than 5 meters.
Excellent Product Consistency: The MMIC monolithic microwave integrated antenna guarantees that each product's receiving sensitivity remains remarkably uniform.
2. Internal Structure
Four-core Plug-in Connector
Sensitivity Adjustment Knob
MIC Integrated Planar Antenna
Detection Direction Selection Pin Header
3. Working Principle
Proximity: Detection is active Away: Detection is ignored
Working principle | Doppler effect |
Center frequency | 24.125GHz |
Maximum installation height | Below 5m |
Detection mode | One-way detection and two-way detection, pin switch |
Minimum detection speed | 5cm/s |
Relay output | COM,NO |
Hold time | 0.5 s |
Wire length | 2.5M |
5. Installation Wiring
Begin by installing the bottom plate.
Affix the installation template to the selected position. Secure the rubber plug and create a cable hole in line with the template. Remove the outer cover and fasten the bottom plate with two corresponding self-tapping screws.
Connect one end of the signal line into the connector and link the other end to the power supply and control terminals of the automatic door.
1-2 (Red and Black): Power Input 12V-24VAC/DC
3-4 (Yellow and White): Signal Output COM (normally open)
Power on the sensor, adjust the panel antenna angle according to real-world conditions, and fine-tune the sensitivity for optimal performance (refer to point 5).
Finally, secure the outer cover and confirm the effectiveness of the adjustments.
6. Detection Orientation and Sensitivity Adjustment
Detection Azimuth Adjustment: The panel antenna can be oriented forward, backward, left, and right.
Modify the planar antenna angle to achieve varied detection distances and areas, as demonstrated in the accompanying illustration.
Sensitivity Adjustment.
MAX: Results in a weaker microwave reflection signal and decreases detection time.
MIN: Yields a stronger microwave reflection signal and extends detection time.
7. Installation Precautions
8. Troubleshooting