Loop Detector of Door Opener, Barrier Gate Jutai Factory

• Function Type: Infrared Range and Communication System
• Detection Type: Microbolometer
• Output Signal Type: Analog Type
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LD-200
• Production Process: SemiConductor Integrated
• Material: Semiconductor Material
• IP Rating: IP44
• Certification: CE
• Customized: Customized
• Model No.: Ld-200
• Application: Industry, Special Equipment, Traffic, Car/Motorcyc
• Usage: Door, Vehicle Detection
• Power Supply: 12-24vadc
• Power Supply1: 110-240V
• Fast Response Times: 10-90ms
• Self-Turning Range: 20-2000uh
• Sensitivity: 16-Way Selectable/ Highest 0.010%Dl/L/Lowest 2.56%
• Power Requirements: 11-240VAC (48 to 63Hz)
• Operation Temp: -40 to +70
• Response Times: Turn-on 10-90ms/Turn-off 10-90ms
• Visual Indications: Power LED-Red/ Channel LED-Green
• Reset: Reset by Push Button on Front of Enclosure
• Relay Output: Presence Relay/ Fault Relay
• Transport Package: Cartoon
• Specification: 13.6*8.6*5.2
• Trademark: JUTAI
• Origin: China
• HS Code: 8608009000
• Production Capacity: 50000/Year
• Package Size: 13.60cm * 8.60cm * 5.20cm
• Package Gross Weight: 0.250kg

Product Description

Product Description:
JUTAI LD200/202 double channels vehicle loop detector series, it with direction recognition function, and which is suitable for many single-channel entry and exit cases.JUTAI develops a multi-functional underground loop detection, which can use as dual channel loop detectors, users can use one unit dual channel loop detector with two-channel loop coils for activating entrance card dispensers, and another coil use for barrier gate safety closing loop. Jutai offers the best vehicle loop detector for any driveway gate control system or car parking management system.

Connections



3. Switch 1=S1 : Channel 1 Loop Function Selection (10 way dip switch)
(1)(Switch 1) DIP 1 & DIP 2 Special Sensitivity Increase For Both Trailer (Both Channels).

(2)(Switch 1=S1) D3, D4, D5 and (Switch 2=S2) D1, D2 Setting Special Functions (Mode1, 2, 3 Direction Detection. Mode 4, 5, 6 Normal mode, two loop detection are separated)

(3)(Switch 1=S1) D6 & D7 & D8 and (Switch 2=S2) D3 & D4 & D5 Setting CH1 and CH2 Sensitivity Selection (Eight Levels Choices).

 Loop Installation
The loops are sealed using a "quick-set" black epoxy compound or hot bitumen mastic to blend with the roadway surface.
When installation, please keep the product plug and socket in the vertical direction



Application

JUTAI LD200/202 double channels vehicle loop detector series, it with direction recognition function, and which is suitable for many single-channel entry and exit cases.
JUTAI LD200/202 double channels loop detector connect to JUTAI One door controller (Model: AC-11), JUTAI gate barrier (Model : BR-110), and JUTAI long range RFID reader (Model : PUHF-9), combined with high temperature resistance loop coils (Model : JTHT-11), Which can be perfectly applied to single-channel entry/exit access control system.

The Working Principle As Follows
When the car from outside entry to Community or parking lot, Press the two loop coils at the same time, we will use JUTAI Double channels loop detector (LD-200/202) to trigger the UHF reader which at the entrance site; when uhf reader read the card ID, It will send ID to controller (AC-11) by wigand output; controller judge ID is valid, output relay signal to open gate barrier, and then car entry the community or parking lots, when car passed barrier gate, barrier arm will down automatically; (this part work with JUTAI Single channels loop LD100/102 for Safety and anti-smashing function) but when the car passed another uhf reader which connected by AC-11 also, this reader will not be triggered by loop detector again, and not send data to controller, so the software only have ENERY records; (Because the Direction Recognition Function of LD200/LD202 is enabled).
In contrast, when car Exit Community or parking lot, when the car passing the inside uhf reader, LD200/LD202 trigger the uhf reader, reader read card and send ID to controller, controller judge ID is valid,output relay signal to open gate barrier; then car EXIT the community or parking lots, when car passed barrier gate, barrier arm will down automatically; (this part work with JUTAI Single channels loop LD100/102 for Safety and anti-smashing function); But when car passed another uhf reader at exit, the double channels loop detector will not trigger signal again, system will only have EXIT records; (because the Direction Recognition Function of LD200/LD202 is enabled).

JUTAI LD-200/202 Double channels loop detector also can be used as two independent single channel loop detectors. This is suitable for a standard one-in and one-out parking lot, There is one barrier and one long range reader at the entrance, exit same also; one loop coils is used to trigger reader and read card, and the other loops coils is used for the barrier anti-smashing function, when the LD-200/202 as two independent loop detector application, from an economic point of view, which can reduce part of the hardware cost; (Enable the Independent working mode function of LD200/202).

Certificates:

Company profile:
SHENZHEN JUTAI COMM Co., Ltd., founded in 2012, with a registered capital of 2 million, is a high-tech enterprise integrating production, research and development, manufacturing and sales. The founders of the company have more than 10 years of work experience in the research and development as well as sales of RF products. At the beginning, JUTAI mainly focus on the development of a series of card reader from low frequency to microwave, including 125KMHZ, 13.56KMHZ, 868915KMHZ, microwave 2.45 KMHZ and semiactive 125K&2.45G. As the development of the market, we expand a series of wireless infrared security detection equipment for access control, based on our self-developed hardware RF product technology. Photocell Family Group includes wired photocell with 20 meters sensing distance, wireless photocell sensor, wireless rotatable infrared sensor and reflective photoelectric beam sensor. In addition, to promote the in-depth application of the project, we have also expand a series of software and hardware solutions around industry applications. The project solutions we have developed mainly include parking management system, card reader access control system, visitor management system (Love Home Solution), automatic door access remote control system (GateLink Solution), and the development of the large-scale cloud software management platform (JUTAI Clouds Solution).

More and More Details Info Please Scan JUTAI Offical QR Code: