| Customization: | Available |
|---|---|
| Type: | Sensor |
| Usage: | Metal |
|
Still deciding? Get samples of US$ 55/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Feature | Description |
|---|---|
| Compact Size | Engineered with a compact housing design, this detector seamlessly integrates into any traffic detection system while meeting industry standards for features and functionality. |
| Diagnostic Capabilities | Enjoy comprehensive diagnostic capabilities, facilitating accurate diagnosis of loop and installation issues to ensure optimal performance. |
| Selectable Presence Time | Customize the output of the presence relay to limit detection output to a fixed time (greater than 30 minutes) while a vehicle remains on the loop, enhancing operational efficiency. |
| Loop Frequency Indication | Detect and eliminate interference between adjacent loops/detectors with integral indication, enabling frequency setting adjustments to optimize performance. |
| Direction Detection | Benefit from direction detection functionality, where CH1 relay output is triggered when a vehicle moves from CH1 to CH2, and CH2 relay output activates when the vehicle moves from CH2 to CH1. |
| Sensitivity Selection | Adjust loop sensitivity and frequency using 7-way dip switches and 10-way dip switch settings, providing flexibility to meet specific application requirements. |
| Mode | Description |
|---|---|
| Presence Mode | In this mode, the detector remains active as long as a vehicle is present within the loop detection area. It provides a continuous output signal as long as the vehicle occupies the detection zone. |
| Pulse Mode | In Pulse Mode, the detector generates a single pulse output signal when a vehicle is detected within the loop area. This mode is suitable for applications where a single signal pulse is required upon vehicle detection. |
| AB Logic Presence Mode (Barrier Operation) | This mode employs AB logic, where the detector triggers the barrier operation based on the presence of vehicles. It ensures smooth barrier operation, allowing vehicles to pass through efficiently and safely. |
| AB Logic Pulse Mode (Counting Logic) | In AB Logic Pulse Mode, the detector utilizes AB logic for pulse output signals. It enables counting logic, where each pulse represents a detected vehicle, facilitating accurate vehicle counting and monitoring. |
| Specification | Details |
|---|---|
| Loop Inductance | 20 - 2000μH |
| Sensitivity | 8-way selectable Highest: 0.015% DL/L Lowest: 0.8% DL/L |
| Frequency | Four-step switch selectable: 20 - 80KHz |
| Power Requirements | 110 - 240VAC (48 to 62Hz) 12 - 24VADC (48 to 62Hz) |
| Operation Temperature | -40ºC to +70ºC (-111ºF to +158ºF) |
| Fault Output | - Blinks slowly: Possible short circuit or insufficient number of turns - Blinks faster: Possible open loop or excessive number of turns |
| Response Times | 10 - 90MS |
| Visual Indications | - Power LED: Red - Channel LED: Green |
| Reset | Reset by push button on front of enclosure |
| Relay Signal | Presence signal or pulse signal |
| ABS (Automatic Sensitivity Boost) | Yes |
| Direction Detection | CH1 and CH2 flow direction detection |
| Loop Frequency | 4 settings (low, med-low, med-hi, high) |
| Humidity | Up to 95% relative humidity without condensation |
| Circuit Protection | Conformal coating over the PCB and all components |
| Connections | Socket mount - 11pin male (JEDEC B11 - 88) |
| Size | 75mm x 43mm x 110mm |
| 01 | +(12-24VADC) |
| 02 | -(12-24VADC) |
| 03 | CH1 LOOP |
| 04 | CH1 LOOP |
| 05 | CH2 LOOP |
| 06 | CH2 LOOP |
| 07 | CH2 Relay COM |
| 08 | CH2 Relay N.O |
| 09 | Ground |
| 10 | CH1 Relay COM |
| 11 | CH1 Relay N.O |
Our innovative loop detector is perfect for automating and opening gates with its expansive detection range. Regardless of inductive value fluctuations, our detector remains steadfast, ensuring unerring performance.
But that's just the beginning! Our loop detector is engineered to recognize a wide array of vehicles, ranging from motorcycles to trucks, cars to buses. Its versatility makes it indispensable for any access control system or gate automation setup.
Our loop detector not only excels in functionality but also withstands the harshest environments. Rigorously tested against temperature and corrosion, it operates flawlessly in extreme conditions, from -40°C to 70°C. Rain or shine, our loop detector consistently delivers exceptional performance.
At Shenzhen Jutai Comm Co., Ltd., we pride ourselves on delivering top-tier products that fulfill our customers' needs. Our loop detector is a testament to this commitment, featuring a DIY coil customization option for tailored performance.
Why delay? Embrace the convenience and efficiency of our loop detector today. Upgrade your access control system or gate automation with the industry's finest. Trust Shenzhen Jutai Comm Co., Ltd. for all your loop detection solutions.
Upgrade your access control system with our state-of-the-art loop detector. Crafted by Shenzhen Jutai Comm Co., Ltd., this sensor is perfect for gate automation and opening. With customizable DIY coils, it detects all vehicle types effortlessly. Whether opting for a wired or wireless system, our loop detector stands as the premier choice. Ideal for commercial doors, gates, and industrial boom gates, it ensures efficient and reliable access control. Install with ease using the built-in method and elevate your gate automation with our advanced loop detection technology.
){kind=link}