High Security Automatic Garage Door Operator with 2 Remote Controls

• Customization: Available
• Type: Single
• Certification: CE
• Model NO.: RM-2K
• Operation: Remote ON / OFF
• Frequency: 433MHz
• Digital Modulation: Ask
• Code: Anti-Cracking Rolling Coding
• Working Distance: >35 Meter
• Add and Delete ID Mode: Through Short-Circuit or Special Remote Controller
• Encryption: Via Special USB Cable (Optional)
• Working Voltage: 12-24VDC
• Transport Package: Carton
• Specification: 44*54*93mm (Product Size)
• Trademark: JUTAI
• Origin: China
• HS Code: 8473309000
• Production Capacity: 5000 Per Month
• Package Size: 4.40cm * 5.40cm * 9.30cm
• Package Gross Weight: 0.200kg

Product Description

Product Description


JUTAI Gatelink Solution includes the gate receiver, it can connect to your barrier gate controller, auto gate motor controller, etc.

working with the UR-4O USB auto-opening gate (plug in the car);

working with the UR-43K auto-opening gate / remote button ( plug in the car);

working with the UR-U2K auto-opening gate / remote button / mobile charger (plug in the car)

working with RM-4K 4 buttons remote control ( remote by your hand).

working with RM-2K 2 buttons remote control (remote by your hand).


REC-3 USB cable for programming the encrypted software, which you can set the same PIN password between the receiver and transponder. this function we open for our client, that is a more flexible solution and you can control your own market project directly.

welcome more and more our distributors and make more profits together.
 

Technology Parameter

1. Frequency: 433MHZ

2. ASK system

3. Code: anti-cracking rolling coding

4. Working distance: >35 meters in the air

5. Add and delete ID mode: through short-circuit or special remote controller

6. Encryption: via USB cable (line should be customized)

7. Working voltage: 12-24VDC,12VAC

8. Storage capacity: 32 ID numbers, larger capacity should be customized.


How to program the receiver:
 
Step1: Follow the instruction to connect the 433MHZ antenna, VCC, GND, FUN, and other wires respectively.

Step2: power on 12-24VDC, add or delete ID
 

Method1: short-circuit the FUN line and the VCC power line to save the ID setting. The USB or remote control must work within the receiver's reading range and the PIN number must be consistent. (Note: After saving, be sure to disconnect the FUN line and the VCC line). If the adding is successful, the green light flashes 5 times. To delete all IDs, short-circuit the FUN line and the GND line, and the green deletion is completed.


Method 2: Use plus and minus remote control. This remote control is only used for adding and subtracting ID numbers. After pressing the left button, the receiver will never enter the add mode after 6 seconds when receiving the ID information. Keep the USB or remote control in the receiver range and the PIN code is consistent.

 If there is no USB or remote control information within 10 seconds, it will exit the add mode. Press the right button of the remote control to enter the delete mode, information is all deleted.


Remote Controls



Packing/Shipping



About us