Jtld-200 Inductive Dual Channel Vehicle Loop Detector for Door Access Control

• Type: Metal Detector
• Usage: Metal
• Installation Mode: Built in
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JTLD-200
• Certification: CE, FCC, RoHS
• Application: Industry, Communication Electronic Products, Car/Motorcycle, Traffic
• Self-Turning Range: 20-2000μh
• Sensitivity: 8 Selectable/Highest 0.015% Dl/L /Lowest 0.8% Dl/L
• Frequency: Four Step Switch Selectable 20-80kHz
• Power Requirements: 110-240VAC(48 to 62Hz)/12-24VDC(48 to 62Hz)
• Operating Temperature: -40ºC~+70ºC/(-110ºF~+158ºF
• Response Time: 10-90ms
• Visual Indications: Power LED-Red/Channel LED-Green
• Reset: Reset by Push Button on Front of Enclousure
• Relay Output: Presence Relay/Fault Relay
• Humidty: up to 95% Relative Humidity Without Condensation
• Circuit Protection: Conformal Coating Over The PCB and All Components
• Product Size: 11.2*7.5*4.2cm
• Fault Output: Blinks Slowly
• Transport Package: Carton
• Specification: 14*9*5.5cm(packing)
• Trademark: JUTAI
• Origin: China
• HS Code: 8543709100
• Production Capacity: 100000 Per Year
• Package Size: 13.60cm * 8.60cm * 5.20cm
• Package Gross Weight: 0.250kg

Product Description

Product Description

 

Product Descriptions

An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnets to induce an electric current. And it is currently the largest amount of traffic detection devices in the world.


The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface, a driving circuit, a signal output circuit, an induction coil, and so on.



A vehicle detector is based on the principle of electromagnetic induction. A group of ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmit the state signal to the vehicle detector, which collects and calculates the flow rate, speed, time occupancy, and length of the vehicle, and so on. Traffic parameters are uploaded to the central control system to meet the needs of the traffic control system.



Application

Technology Parameter

Model	LD-200
Dimension	112*75*42mm
Socket	Have, 11pin submarginal type(86cp1)
NT	200g
Operating Voltage	110-240VAC (48 to 62Hz)
Loop Inductance	20-2000μH
Working Frequency	Four-step switch, selectable 20-80KHz
Reaction Time	10-90ms
Sensitivity	16-way selectable levels
Output Type	Four relays
Output Mode	Presence/Presence&time-lapse/pulse

Function and Advantage  

Wide range of detection:
The detecting range can be from 15UH-2000UH, the loop detector can be in stable work status no matter the inductive value how changes.

Many types of vehicles can be detected:
It can detect many types of vehicles with different heights and weights, like Motorcycle, Truck, Car, Bus, etc.

Adapt to the bad environment:
For all of our loop detectors we do temperature tests and corrosion tests (-40 degrees to 70 degrees), let it always keeps outstanding performance.



Installation Diagram



Size:(mm)



Certificate




Packing/Shipping





About us




Product Descriptions

An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnets to induce an electric current. And it is currently the largest amount of traffic detection devices in the world.


The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface, a driving circuit, a signal output circuit, an induction coil, and so on.



A vehicle detector is based on the principle of electromagnetic induction. A group of ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmit the state signal to the vehicle detector, which collects and calculates the flow rate, speed, time occupancy, and length of the vehicle, and so on. Traffic parameters are uploaded to the central control system to meet the needs of the traffic control system.



Application

Technology Parameter

01: LINE,(AC100V-AC240V)

02: NEUTRAL,(AC100V-AC240V)

03: CH1 LOOP

04: CH1 LOOP

05: CH2 LOOP

06: CH2 LOOP

07: CH2 Relay COM

08: CH2 Relay N.O

09: Ground

10: CH1 Relay COM

11: CH1 Relay N.O


Function and Advantage  

Wide range of detection:
The detecting range can be from 15UH-2000UH, the loop detector can be in stable work status no matter the inductive value how changes.

Many types of vehicles can be detected:
It can detect many types of vehicles with different heights and weights, like Motorcycle, Truck, Car, Bus, etc.

Adapt to the bad environment:
For all of our loop detectors we do temperature tests and corrosion tests (-40 degrees to 70 degrees), let it always keeps outstanding performance.



Installation Diagram



Size:(mm)



Certificate




Packing/Shipping





About us




Product Descriptions

An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnets to induce an electric current. And it is currently the largest amount of traffic detection devices in the world.


The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface, a driving circuit, a signal output circuit, an induction coil, and so on.



A vehicle detector is based on the principle of electromagnetic induction. A group of ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmit the state signal to the vehicle detector, which collects and calculates the flow rate, speed, time occupancy, and length of the vehicle, and so on. Traffic parameters are uploaded to the central control system to meet the needs of the traffic control system.



Application

Technology Parameter

01: LINE,(AC100V-AC240V)

02: NEUTRAL,(AC100V-AC240V)

03: CH1 LOOP

04: CH1 LOOP

05: CH2 LOOP

06: CH2 LOOP

07: CH2 Relay COM

08: CH2 Relay N.O

09: Ground

10: CH1 Relay COM

11: CH1 Relay N.O


Function and Advantage

Wide range of detection:
The detecting range can be from 15UH-2000UH, the loop detector can be in stable work status no matter the inductive value how changes.

Many types of vehicles can be detected:
It can detect many types of vehicles with different heights and weights, like Motorcycle, Truck, Car, Bus, etc.

Adapt to the bad environment:
For all of our loop detectors we do temperature tests and corrosion tests (-40 degrees to 70 degrees), let it always keeps outstanding performance.



Installation Diagram



Size:(mm)



Certificate




Packing/Shipping





About us