Efficient 125kHz Gp-99 USB Card Reader for Secure Access

• Customization: Available
• Type: ID Card Reader
• Card Type: EM
• Model NO.: GP-99
• Interface: USB, Serial Port, Wigand
• Reading Distance: 1-5m
• Application: Parking, Hospital, Library, Company, Bank, Store, Communicity
• Interfaces: Wiegand 26 or 34 Bits, RS232 or RS485
• RFID Cards Accepted: 125kHz, 64 Bits, Manchester Encoding
• Output Voltage: DC 12V/1A
• Penetrate Solar Film: V-Kool
• Reading Range: 90-130cm
• Power Supply Input Voltage: AC 120V/60Hz or 230V/50Hz
• Audio / Visua Indication: Bright Blue LED and Buzzer
• Housing Material: ABS
• IP Level: IP65
• Transport Package: Cartoon
• Specification: 50.3(L)*40.8(W)*10.6(H) cm
• Trademark: JUTAI
• Origin: China
• HS Code: 847160900
• Production Capacity: 20000
• Package Size: 52.00cm * 47.00cm * 12.00cm
• Package Gross Weight: 8.000kg

Product Description

Product Description

As an RFID manufacturer, JUTAI provides customers with various RFID frequency card reader solutions, including short range RFID 13.56Mhz, middle-range reader with 125Khz frequency, long range UHF reader, 2.45Ghz long-distance card reader. JUTAI low-frequency middle range reader GP-99 is a parking vehicle access management and access control system. The frequency band is 125kHz RFID. According to the general scene environment, the reading range can reach 130cm, which can effectively Through the car Solar Film (V-KOOL), the EM-51 proximity card inside the car can be read without opening the car window;
 

GP99 provides customers with a very good experience, so that customers do not need to open the car window on rainy days to avoid being wet by the rain, but also greatly reduce the risk of car robbery at the entrance, and the well-made cards are not easy to be broken, which can reduce the cost, it is an ideal solution for access control management, parking access management, attendance system management, bus attendance and other applications, suitable for residential areas and commercial buildings., etc.
 

Our Advantages

 

The GP-99 is equipped with a premium power supply
The interference signal is reduced by filtering technology to obtain interference-free current. It can reduce external environmental interference and has lightning protection


Anti-reread function
When two readers are installed on the same site, the distance between the two readers is  1.8-2 meters, when one card reader reads the card ID in the inductive range, the other card reader will no longer read the card within 3s/10s. This function is mainly used to solve the problem of two card reader interferences with relatively close distance between the entrance and exit of the parking lot.

Anti-Interference
In the same environment, GP99 has a strong anti-interference ability and automatic adjustment function to adapt to the surrounding environment without interference.
Signal LED Indicator
When reading the cards, it has an LED display and sound.
Loop detector function (optional)
The vehicle can be managed by the pressure sensing function to reduce the malfunction and open the door. The JUTAI GP99 features a grounding capability for use with our vehicle loop detectors. For some special applications, you can connect to the ground loop detector. When the vehicle is pressed to the ground loop coil, the card can start working with the card reader, which makes the whole system highly reliable and safe.
IP65 Waterproof Rating
Our card readers are IP65 rated for perfect work in rainy days, saving you cost without the need for extra accessories.
GP99 software can be upgraded and the maintenance cost is low.
Long service life, product warranty is two years.
Best reading range: 130cm (Install GP99 should avoid direct contact with metal, 10-15cm apart).
With the JUTAI EM card, the card reading distance is more stable.

Intuitive Comparison 
Card Coil
The coil of the usual product is compared with the number of turns of the JUTAI EM-51 card, and the card of poor quality can reduce the reading distance by up to 50%.
The JUTAI EM-51 card is pressed by an ultrasonic machine. The card has a longer service life and is not easily damaged. The normal cards on the market are glued and easy to crack when used for a long time.
With the card holder , it can realize hand-free entry/exit.
With the high and low temperature testing, JUTAI's Card holder can be completely attached to the windshield inside or outside the car, and the card is automatically read and no need open car window

With Wiegand interface
The GP-99 with Wiegand 26 or Wiegand 34 allows customers to directly integrate with existing access control systems.
With RS232/RS485 interface
Customers can connect to PC software directly via RS232.
Products Package
Strict packaging is to ensure that the products can perfectly reach to our customers and work effectively. JUTAI has a professional quality inspection department and packaging department, and pays great attention to quality control and packaging materials.