JUTAI Single Channel Vehicle Detector User Guide
Product Descriptions
An inductive loop detector is an electromagnetic communication or traditional traffic detection system which mostly uses buried coils and moving magnets to induce an electric current. And it is currently the largest amount of traffic detection devices in the world.
The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface, a driving circuit, a signal output circuit, an induction coil, and so on.
A vehicle detector is based on the principle of electromagnetic induction. A group of ring-shaped induction coils with a certain working current are buried in the roadbed section of the same lane. When the vehicle passes or stops in the annular buried coil, the vehicle itself cuts the magnetic flux line, causing the wire loop inductance. The amount of change, the detector can detect the passing state of the vehicle by detecting the change of the inductance, and transmit the state signal to the vehicle detector, which collects and calculates the flow rate, speed, time occupancy, and length of the vehicle, and so on. Traffic parameters are uploaded to the central control system to meet the needs of the traffic control system.
Technology Parameter
01: LINE,(AC100V-AC240V)
02: NEUTRAL,(AC100V-AC240V)
03: CH1 LOOP
04: CH1 LOOP
05: CH2 LOOP
06: CH2 LOOP
07: CH2 Relay COM
08: CH2 Relay N.O
09: Ground
10: CH1 Relay COM
11: CH1 Relay N.O
Function and Advantage
Wide range of detection:
The detecting range can be from 15UH-2000UH, the loop detector can be in stable work status no matter the inductive value how changes.
Many types of vehicles can be detected:
It can detect many types of vehicles with different heights and weights, like Motorcycle, Truck, Car, Bus, etc.
Adapt to the bad environment:
For all of our loop detectors we do temperature tests and corrosion tests (-40 degrees to 70 degrees), let it always keeps outstanding performance.
Connections
The following photo we show the details connections for JUTAI Single channel loop detector LD100 And LD102,Usually we using pin1 and pin2 connect power supply, pin8 and pin9 connect loop coils,Usually we recommed JUTAI Loop cable Mode JTHT-11;pin5 connect GND,details info refer to the following connection;
Detector Position and Installation
1. Install the detector in a weatherproof housing.
2. The detector should be as close to the sensing loop as possible.
3. The detector should always be installed away from strong magnetic fields.
4. Avoid running high voltage wires near the loop detectors.
5. Do not install the detector on vibrating objects.
6. When the control box is installed within 10 meters of the loop, normal wires can be used to connect the control box to the loop. More than 10 meters requires the use of a 2-core shielded cable. Do not exceed 30 meters distance between control box and loop.
Loop Installation
The loops are sealed using a "quick-set" black epoxy compound or hot bitumen mastic to blend with the roadway surface.
When installation, please keep the product plug and socket in the vertical direction
Application
JUTAI LD200/202 double channels vehicle loop detector series, it with direction recognition function, and which is suitable for many single-channel entry and exit cases.
JUTAI LD200/202 double channels loop detector connect to JUTAI One door controller (Model: AC-11), JUTAI gate barrier (Model : BR-110), and JUTAI long range RFID reader (Model : PUHF-9), combined with high temperature resistance loop coils (Model : JTHT-11), Which can be perfectly applied to single-channel entry/exit access control system.
JUTAI LD-100/102 series vehicle detectors have a large sensing range, and the adaptive sensing range is 15 uh to 2000 uh; this can easily detect various large and small type vehicles, such as small and electric vehicles, Motorcycles, conventional cars, cars, trucks, trailers, trailers, etc.
Company profile:
SHENZHEN JUTAI COMM Co., Ltd., founded in 2012, with a registered capital of 2 million, is a high-tech enterprise integrating production, research and development, manufacturing and sales. The founders of the company have more than 10 years of work experience in the research and development as well as sales of RF products. At the beginning, JUTAI mainly focus on the development of a series of card reader from low frequency to microwave, including 125KMHZ, 13.56KMHZ, 868915KMHZ, microwave 2.45 KMHZ and semiactive 125K&2.45G. As the development of the market, we expand a series of wireless infrared security detection equipment for access control, based on our self-developed hardware RF product technology. Photocell Family Group includes wired photocell with 20 meters sensing distance, wireless photocell sensor, wireless rotatable infrared sensor and reflective photoelectric beam sensor. In addition, to promote the in-depth application of the project, we have also expand a series of software and hardware solutions around industry applications. The project solutions we have developed mainly include parking management system, card reader access control system, visitor management system (Love Home Solution), automatic door access remote control system (GateLink Solution), and the development of the large-scale cloud software management platform (JUTAI Clouds Solution).
){kind=link}
){kind=link}