Dual Chanle Loop Detector Vehicle Detection Ld200 for Parking Barrier Gate

• Customization: Available
• Signal Transmission: Relay
• System: Barrier Gate/Traffic System
• Model NO.: JTLD-200
• Type: Metal Detector
• Application: Home, Communication Electronic Products, Industry, Special Equipment, Traffic, Car/Motorcycle
• Usage: Door, Auto
• Certification: CE, FCC
• Loop Inductance: 20-2000μh
• Sensitivity: 8 Way Selectable
• Frequency: Four Step Switch Selectable 20-80kHz
• Power Supply: 110-240VAC (48 to 62Hz) / 12-24vadc(48 to 62Hz)
• Response Times: 10-90ms
• Relay Signal: Presence Signal or Pulse Signal
• Direction Detection: CH1 and CH2 Flow Direction Detection
• Connections: Socket Mount-11pin Male(Jedec B11-88)
• Size: 75mm*43mm*110mm
• Transport Package: Cartons
• Specification: 1unit package 14*9*5.5cm
• Trademark: JUTAI
• Origin: Shenzhen
• HS Code: 9031809090
• Production Capacity: 500000/Year

Product Description

Product Description

JUTAI develops a multi-functional underground loop detection, which can use as dual channel loop detectors, users can use one unit dual channel loop detector with two-channel loop coils for activating entrance card dispensers, and another coil use for barrier gate safety closing loop. Jutai offers the best vehicle loop detector for any driveway gate control system or car parking management system.

Product Parameters

Loop Inductance	20-2000μH
Sensitivity	8 way selectable / Highest 0.015% DL/L  /  Lowest 0.8% DL/L
Frequency	Four step switch selectable 20-80KHz
Power Requirements	110-240VAC (48 to 62Hz) /   12-24VADC(48 to 62Hz)
Operation Temp	-40ºC to +70ºC / (-111ºF to +158ºF)
Fault Output Blinks slowly	It may be because the loop is a short circuit or the no: of turns is not enough
Blinks faster	It may be because the loop is open or the no: of turns is too many.
Response Times	10-90MS
Relay signal	presence signal or pulse signal
ABS	automatic sensitivity boost
Direction detection	CH1 and CH2 flow direction detection
Loop frequency	4 setting(low,Med-low,Med-Hi,High)
Connections	Socket mount-11pin male(JEDEC B11-88)
size	75mm*43mm*110mm

 

Detailed Photos

 

Applications

Automatic Gate
Traffic Light System
Gate Drive Mechanisms
Operating Barriers
Parking Guidance System
Activating Card Dispensers in Parking Lots.
Parking Barrier Control
Vehicle Access Control
Traffic Control System / Traffic Toll System
Vehicle Counting System
Motorised Gates and Doors.
Security Bollards/ Rolling Shutters/Garage Doors
Camera trigger

Client Projects Reference

loop detector for controlling the barrier gate and traffic lights.
barrier gates
loop detector and cable
traffic lights
long range readers
long range cards.
access control software

Single-channel Road for entry and exit same lane:
loop detectors
barrier gate
traffic lights
long range reader
long range cards
access control software
 

Direction Detection : (If the vehicle moves from CH1 to CH2, then CH1 relay output; if the vehicle moves from CH2 to CH1, then CH2 relay output).

The LD-200 series detector may be configured for any one of the following modes: 

• Presence Mode
• Pulse Mode
• AB Logic Presence Mode(Barrier Operation)
• AB Logic Pulse Mode(Counting Logic)

 

Installation Instructions

Our Advantages

 

Company Profile