Traffic Detection Barrier Gate Accessory Inductive Loop System Traffic Metal Detector

• Signal Transmission: Relay
• System: Passage System
• Type: Metal Detector
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JTLD-102
• Application: Industry, Special Equipment, Traffic, Car/Motorcycle
• Usage: Door, Vehicle Detection
• Certification: CE, FCC
• Self-Turning Range: 20-2000uh
• Fast Response Times: 10-90ms
• Power Supply: 12-24vadc
• Relay Time: 0,2,4,8,10,15,20,30 Seconds0,2,4,8,10,15,20,30 Sec
• Operation Temp: -40 to +70
• Relay Output: Presence Relay/Fault Relay
• Integral Fault Relay: Provide an Output in The Event of a Loop Fault Con
• Transport Package: Carton
• Specification: 1unit package 14*9*5.5cm
• Trademark: JUTAI
• Origin: Shenzhen
• HS Code: 9031809090
• Production Capacity: 200000/Year
• Package Size: 12.00cm * 8.00cm * 5.00cm
• Package Gross Weight: 0.300kg

Product Description

Product Descriptions

The sense of the ground, that is, the toroidal coil type vehicle detector, is a traditional traffic detector, mostly a buried detection system, and is currently the largest amount of detection equipment in the world.


The embedded toroidal coil type vehicle detector is mainly composed of a regulated power supply, an oscillating coil, a logic circuit, a microprocessor, an interface, and a driving circuit, a signal output circuit, an induction coil, and the like.



Loop Detector With Large Sensing Range

JUTAI LD-100/102 series vehicle detectors have a large sensing range, and the adaptive sensing range is 15 uh to 2000 uh; this can easily detect various large and small type vehicles, such as small and electric vehicles, Motorcycles, conventional cars, cars, trucks, trailers, trailers, etc.; but if we use the loop coils value reach to 2000 uh, then we need a lot of high temperature wire (Model:JTHT-11), which will cause material Waste, increase the hardware cost of the project, and the actual application does not need so many wires, usually we set the inductance in the range of 300 uh, and take the coil size of 1 meter wide and 2 meters long as an example , We suggest do 8-10 turns, which inductive value can easily detect all kinds of car models, then if we want to do the fast installation , first we do a loop coils, 1m wide, 2m long, assuming 10 turns, We use a multimeter to measure the inductance value of these 10 turns, and then according the parking entry/exit channel size is different, we can flexibly set the size of the coil within this inductance value range. If the diameter of the coil is smaller, then we do more turns; If the diameter of the coil is larger, we do less; so that it can be flexibly applied to entrances and exits of various sizes, and the overall installation efficiency is improved. For detailed operations, please refer to the video.

 

 

Detector Position And Installation

1. Install the detector in weatherproof housing.

2. The detector should be as close to the sensing loop as possible.

3. The detector should always be installed away from strong magnetic fields.

4. Avoid running high voltage wires near the loop detectors.

5. Do not install the detector on vibrating objects.

6. When the control box is installed within 10 meters of the loop, normal wires can be used to connect the control box to the loop. More than 10 meters requires the use of a 2 core shielded cable. Do not exceed 30 meters distance between control box and loop.


Connections



Applications


 

 

LD-100/LD-200	12-24AVDC
LD-102/LD-202	110-240AC
OEM/ODM	YES

Certificate



Packing/Shipping 



About us