| Customization: | Available |
|---|---|
| After-sales Service: | 2 Years Qualtiy Warranty |
| Warranty: | Whole Life Sevice |
|
Still deciding? Get samples of US$ 59/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
JUTAI RD24-6M vehicle motion sensor utilizes K-band microwave technology to detect people and vehicles from an overhead position. It provides wide coverage and high resolution to activate all types of automatic doors and industrial gates and traffic barriers.
The RD24-6M is easily installed at a height of up to 20 feet (6 meters). With its versatile mechanical orientation, the RD24-6M ensures accurate positioning to the required coverage area. The detection sensitivity and direction of movement (approaching, leaving, or both) are programmed by reset switch settings.
| MODEL | RD26-6M |
| OPERATING FREQUENCY | 24.150GHZ |
| INPUT VOLTAGE | 1000-24VDC |
| WORKING CURRENT | <150MA |
| OUTPUT POWER(EIRP) | <200BM |
| RELAY CONTACT | 1A@24VDC/AC |
| RELAY CONTROL TIME | 1-6S ADJUSTABLE |
| DETECTABLE SPEED | 20-90MS |
| SENSITIVITY | 3 LEVELS |
| HORIZONTAL DIRECTIONALITY | 0-28° |
|
VERTICAL
DIRECTIONALITY
|
0-60° |
| DETECTION RANGE | 1-6M(3.3-19.7FT) |
| OPERATING TEMPERATURE | -40ºC~+70ºC |
| MECHANICAL PROTECTION | IP67 |
| DETECTION INDICATOR | GREEN LED |
| POWER LED | RED LED |
| HOUSING | ABS |
| DIMENSIONS | L 0.39FT(118MM) * W 0.32FT(98MM) * D 0.09FT(26MM) |
| WEIGHT | 1.0LBS(300G) |
| CONNECTION | 4.9FT(1.5M)CABLE |
1. Please choose a power adapter output 8-40VDC 1A.
2. When using a gate for power supply, please ensure that the output current is not less than 200ma.
3. When applied to lanes, the best height between the radar center and the ground is 50-60cm.
4. The distance between the center of the radar and the fence pole, the octagonal fence is not less than 25cm, and the right angle fence is not less than 30cm.
5. The radar installation surface should be adjectiveto the ground and be fixed reliably.
6. The ground within the detection range should be flat without any obstacles. When the angle between the passing vehicle and the radar is greater than 30 degrees, please set up road barriers to guide the vehicle through.
RD24-6M Radar Detector Manual Setting
The meaning of the indicator light and function menu (red LED)
The first step: Enter: Press the function key (do not release) until the menu number to be set is selected and release the key, the corresponding parameter light will be on.
The second step: amend parameters: Change the current parameter by jog function key.
The third step: Save parameters: Press the function key frequently, and then release the red indicator lights 1, 2 and 3 flashing at the same time. The parameters will be changed and saved.
Quick setting:
1. Straight lane application settings (Only need 2 step). The first step: Set the application scene to straight rod mode (Menu6).The second step: Set the detection distance (Menu1).
2. Fence pole barrier application settings (only 3 step). The first step: Set the application scenario to fence mode (Menu6).The second step: Set the detection distance (Menu1).The third step:The brake speed is determined to be 1 second (Menu3).
3. Trigger mode application settings (Only need 3 step). The first step: Set the application scenario to trigger mode (Menu).The second step: Set the detection distance (Menu1).The third step: Set the reply output method (menu5).
Optimize Radar Detector Settings (Select Setting Items)
1. Sensitivity setting: The recommended setting for electric vehicles is medium or low, and the pedestrian passage setting is medium or high. On the occasion of shooting, you can set one in the middle and the other as high or low.
2. Pedestrian and vehicle distinction setting: (It is strongly recommended to set the distinction between man and vehicle in non-necessary situations.) Electric vehicle passage or pedestrian passage should be set to "No distinction between pedestrians and vehicles". Otherwise. Please set the " distinction the pedestrian and the vehicle" To prevent accidents caused by non-vehicle passing.
1. The radar is triggered by the fence itself during opening or closing.1.1 Check whether the distance between the radar and the center of the fence is in accordance with the requirements and whether the radar installation surface is perpendicular to the fence. Please adjust the installation position or add a 2-4mm spacer to the side of the radar close to the fence. 1.2 Whether the set opening speed is greater than the actual closing speed. 1.3 Whether there is no distinction between people and vehicles, if it is necessary to set the distinction between people and vehicles, the sensitivity can be lowered by one level.
2. Radar output has not been resetThe set distance is greater than the lane or a foreign object on the ground is detected,Or the radar is not installed vertically. If you still can't solve the problem after troubleshooting, please enter menu 2 (when the 3 green lights flash at the same time, press the function key and go straight to "Radar Initialization"). After the initialization is completed, please power on again.
3. The three lights are always on after the radar is powered on.The radar is initialized, and it still doesn't work after repeated restarts, please return to the factory for inspection.
4. The indicated green light number 1 and number 3 flash.When the radar judges that the gate is triggered. When the gate is closed, or there is a rebound signal at the edge of the X beam, the radar cannot distinguish. When there it is a fence or a vehicle, and the gate will be closed after the gate is opened or there is no lane passing after the signal disappears. It is a safety mechanism to prevent smashing the rear of the car and does not need to be dealt with.
){kind=link}