Photo Beam Sensors for Barrier Gate Car Park Sliding Gate Opener

• Function Type: Infrared Range and Communication System
• Detection Type: Infrared Photocells
• Output Signal Type: Digital Type
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BP-20
• Production Process: Integration
• Material: ABS+PC(UV)
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Transmetter Voltage: 2xaa Alkaline Batteries No.7
• Output Contact: Relay Output, No&Nc
• Stand-by Current: Less Than 16mA
• LED Showing: Red LED
• Size: 48*94*33mm
• Receiver Voltage: 9-30vadc
• Detecting Distance: 1-20m
• Response Time: Less Than 200ms
• Load: 30VDC/0.1A, 125VAC/0.5A, 60VDC/0.3A
• Working Temperature: -10 to +60 ºC
• Transport Package: Cartons
• Specification: 1unit package 14*9*5.5cm
• Trademark: JUTAI
• Origin: Shenzhen
• HS Code: 8608009000
• Production Capacity: 500000/Yea
• Package Size: 26.50cm * 21.50cm * 14.50cm
• Package Gross Weight: 0.200kg

Product Description

Product Description

JUTAI Photoelectric beam sensor, when interrupting the infrared, the relay will output switch signal, it can work for a parking barrier gate, walking gate, vehicle gate as body induction or vehicle induction, it also can word as window, door and passageway anti-burglar detection.



Features

1. The transmitter using battery for working, JUTAI made it by low-power consumption technology, it can be used for a long using life, the battery using life at least can have 2 years, which is a more stable and reliable product for you.
2. The BP-20 is covered with a shielded panel to protect the photocell from physical interferences and weather protection. And UV-resistant material and high-quality infrared beam are used to prevent distance attenuation caused by long-time exposure to strong sunshine.



Technology Parameter



Installation

1. Fixing the bottom shell to the installation surface;
2. Put the top shell with the convex mirror on the bottom shell;
3. Then using the M3*6 screws fixing the top and bottom shell;
4. Testing it when there is an obstacle, the receiving end relay will output the signal.
For example, A photocell is a light-dependent safety sensor that will prevent an electric gate from opening or closing onto a vehicle if opened when obstructed. When the beam is broken/ a vehicle has parked in the path of the gate, the photocells send a signal to the electric gate control board to stop the gates.



Connection Diagram



Packing/Shipping



About us