Metal Waterproof RFID Card Reader with Keypad IC ID Cards

• Type: ID Card Reader
• Card Type: Mifare
• Interface: Serial Port, Wiegand 26 Bit
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SMI-56
• Reading Distance: 3-6cm
• Application: Parking, Hospital, Library, Company, Bank, Store
• Power Supply: DC12V
• User Capacity: 2000
• Active Current: <60mA
• Idle Current: 25±5mA
• Lock Output Load: Max 3A
• Alarm Output Load: Max 20A
• Operating Temperature: -45ºC~60ºC
• Operating Humidity: 10%-90%Rh
• Adjustable Door Relay Time: 0-99 Seconds
• Adjustable Alarm Time: 0-3 Minutes
• Wiegand Interface: Wiegand 26 Bit
• Wiring Connections: Electric Lock, Exit Button, External Alarm,
• Transport Package: Carton
• Specification: 80*120*25mm(Product Size)
• Trademark: JUTAI
• Origin: China
• HS Code: 8517709000
• Production Capacity: 10000 Per Year
• Package Size: 10.00cm * 3.00cm * 14.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Descriptions


The unit is a single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy, and vandal-proof Zinc Alloy electroplated case which is available in either a bright silver or matt silver finish. The electronics are fully potted so the unit is. This unit supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports 125KHZ EM cards,13.56MHz Mifare cards. The unit has many extra features including lock output current short circuit protection, Wiegand output, and a backlit keypad. These features make the unit an ideal choice for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks, and prisons.




Features

Strong Zinc Alloy Electroplated anti-vandal case
Full programming from the keypad
2000 users support Card, PIN, Card + PIN
 Be used as a stand-alone keypad
Backlight keys
Wiegand 26 input for connection to an external reader
Wiegand 26 output for connection to a controller      
Adjustable Door Output time, Alarm time, Door Open time
Very low power consumption (30mA)
Last operating speed, <20ms with 2000 users
Lock output current short circuit protection
Easy to install and program
Built-in light-dependent resistor (LDR) for anti-tamper
Built-in buzzer
Red, Yellow, and Green LEDs display the working status

Specifications


Application

Door access control system
Elevator management system
Outdoor barrier gate vehicle access control
Visitor management system
Time attendance management



Installation
Remove the back cover from the keypad using the supplied special screwdriver
Drill 2 holes on the wall for the Self-tapping screws and I hole for the cable
Put the supplied rubber bungs into the two holes
Fix the back cover firmly on the wall with 2 Self-tapping screws
Thread the cable through the cable hole
Attach the keypad to the back cover.



Wiring Details


Common Power Supply Diagram



Special Power Supply Diagram



The unit operating as a Wiegand Output Reader
In this mode, the unit supports a Wiegand 26 bit output so the Wiegand data lines can be connected to any controller which supports a Wiegand 26 bit input.




Packing/Shipping



About us