| Type: | Copper |
|---|---|
| Conductor Type: | Solid |
| Application: | Underground |
| Conductor Material: | Copper |
| Sheath Material: | Silicone Rubber |
| Insulation Material: | Rubber |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier JUTAI is a single channel loop detectors supplier For any Parking Projects. An inductive loop is a wire wound in a rectangular, square, or round shape that is typically sawed cut into the pavement. The ends of the wire are brought back to an enclosure, which houses a single-channel loop detector module. The detector module powers the loop and causes a field to form around the loop. The loop automatically tunes to a resonant frequency. The detector module monitors this resonant frequency to determine if a vehicle is in the loop area.
| Model: JTHT-11 |
| Size: 0.5m*2 |
| Temperature: -65ºC to +200ºC |
| One Roll Length: 305m |
| Material: Silicone rubber and standard silver-plated copper wire |
| Color: Red and Black |
Loop Installation
All permanent loop installations should be installed in the roadway by cutting slots with a masonry cutting disc or similar device. A 45° crosscut should be made across the loop corners to reduce the chance of damage that can be caused to the loop wire insulation at right angle corners.
Loop detectors are used to detect the presence of vehicles. The loop is connected to the detector. find more LD-100 loop detectors specification.
Exit loops are used to open gates to allow a vehicle's exit.
Safety loops are used to prevent a gate from closing on a vehicle. Two loops can be wired to one detector. This is frequently the case in safety loops. Loops are placed in front of and behind the gate.
Shadow Loops are typically used in commercial locations. They close the gate as soon as a vehicle passes over them deterring other vehicles from tailgating in behind them.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}